49 resultado para "parametric design"
Tutorial
RAM Structural Systems BIM link for steel connection design (AISC)
The import has been developed for Steel Connection and Steel Member Design in Checkbot. Once you finish with the connection design, you can close the connection and go back to Checkbot to continue with the design process. Forces in the Brace will be used to design the connection. Forces on Concrete 1D elements are skipped on the import process.
Steel
Checkbot
RAM Structural System
Tutorial
RFEM BIM link for the structural concrete beam design (EN)
After that, continue to the tendon design. 5 Tendon design Import all pre-tensioned tendons from the template. For the construction stage at the End of design working life add the variable load cases LC3 and LC4 . The prescriptions of envelopes can be seen at the bottom of the window. 10 Concrete Design The settings of the checks can be defined in the Data tab.
Concrete
Beam
EN (Eurocode)
BIM link
RFEM
RSTAB
Prestressed members
Tutorial
How to combine Tekla Structures and SAP2000 for steel connection design (EN)
The Checkbot appears and you can select the Design code (EN) . Confirm the import by clicking Connection . software you use). 3 How to use the link (Tekla Structures) You can proceed and export the same joint model from Tekla Structures to import the connection design You have combined joint form Tekla Structures and SAP2000 and code-checked a structural steel joint according to EN. 8 Synchronize models The design process
Steel
Checkbot
EN (Eurocode)
BIM link
Tekla Structures
SAP2000
Connection
Tutorial
Robot Structural Analysis BIM link for concrete structural design (EN)
We will describe how to design, reinforce, and check a prestressed concrete double-span beam according to Eurocode. 1 How to activate the link Download Now, you can move to the Tendon design by the button on the top ribbon. In the left tree, you open Tendons – Tendons Layout . In Concrete Design 1D – Data in the left tree, you can find the settings of the checks that will be evaluated.
Concrete
Beam
EN (Eurocode)
BIM link
Robot Structural Analysis
Tutorial
Midas Civil BIM link for design of three-span post-tensioned bridge
If you are importing for the first time, configure the generation of design groups and members. The BIM app will automatically combine the imported bridge superstructure into a single design member. Checks Now, you will move to the Data tab in the 1D Concrete Design group.
Concrete
EN (Eurocode)
midas Civil + Gen
Load effects
Geometry
Bridges
Tutorial
SAP2000 BIM link for the structural design of a steel member (EN)
The Checkbot pops up, and you select New , desired Design code (EN), and finally Create project . Do the same for columns 1+2 and 7+8 3 Design Now you can run the module Member by right-clicking on the selected member and clicking on Open .
Steel
Member
Checkbot
BIM link
SAP2000
EN (Eurocode)
Tutorial
Axis BIM link for for the structural concrete beam design (EN)
You will learn how to activate and use the link between AxisVM, IDEA StatiCa Beam, and IDEA StatiCa Detail to easily design, reinforce and code-check deep This information is essential for ensuring the structural integrity and capacity of the design. The Crack Width tab provides essential information for the SLS check, ensuring compliance with design requirements.
Concrete
Detail 2D
EN (Eurocode)
AxisVM
Openings
Tutorial
SAP2000 BIM link for the structural concrete design (EN)
The beam will be code-checked according to Eurocode with a design working life of 50 years. All internal forces will be exported from the SAP2000 .
Concrete
EN (Eurocode)
BIM link
SAP2000
Beam
Tutorial
Grasshopper API link - bulk calculation of steel joints (06)
In this tutorial, you will learn how to use a parametric template for a bulk calculation of steel joints with the same geometry. IDEA StatiCa Checkbot – import of a structure, design of a joint Open the attached folder with a structure imported from 3rd party software. You can design it correctly according to your needs or use our fully prepared joint here .
Steel
Connection
IDEA Open Model (API)
Grasshopper
Checkbot
Modeling
Tutorial
Learning Module: Buckling
of failure modes, are general and applicable to structural design broadly. It also depends on the design method used (i.e., LRFD vs ASD ). Vertical Bracing Connections – Analysis and Design. Design Guide 29, American Institute of Steel Construction, Chicago, Illinois.
Steel
AISC (USA)
Buckling
Plates
Tutorial
Reinforced column with a bracket (EN)
Start with IDEA StatiCa Detail to quickly design and code-check concrete discontinuity regions. help you to design the reinforcement. Read more about Topology Optimization Now design the reinforcement. You can reinforce your detail based on the results from the Design tools.
Concrete
Detail 2D
EN (Eurocode)
Corbels/Brackets
Tutorial
BIM link Connection to Detail - Eccentrically loaded anchoring
Since the release of version 24.1, IDEA StatiCa Detail has been out of BETA for 3D anchoring design . Support The ground has some stiffness, which should be considered for precise design. If you would design a footing from scratch in the Detail application, both options would be ON.
Concrete
Steel
Connection
EN (Eurocode)
CBFEM
CSFM
Detail 3D
Tutorial
Horizontal beam-column-brace gusset (AISC)
Create a new project by selecting a starting template closest to the desired design, filling in the name, and choosing the design code and default material Finish the design with the operation Stiffener . And set the correct properties of STIFF1 . Let’s check the final design of the joint. 5 Calculation and Check Start the analysis by clicking Calculate in the ribbon.
Steel
AISC (USA)
Connection
Shear connection
Tutorial
AxisVM BIM link for steel member buckling analysis (EN)
Now you can click on Open , a new window with the module Member appears. 3 Design To get the analysis of the member, we first have to design all the joints For node 8 , you can use the same design as for node 6 . Just click on Apply . Here is the design of the last node 4 . AxisVM-Gusset plate AxisVM-Gusset plate The last operation in Member , you will apply are openings along with the member M3 4 Analysis When finishing with the design
Steel
Member
Checkbot
AxisVM
EN (Eurocode)
Tutorial
Eccentrically loaded anchoring in Detail
The tutorial shows how to design and code-check a reinforced concrete block according to Eurocode. Back in the Design tab, add a new Single Anchor. Now, create a design load combination . You can add the combination factors based on the code.
Concrete
EN (Eurocode)
CSFM
Detail 3D
Tutorial
Midas Civil BIM link for bridge load rating
Moving loads defined by Czech design code ČSN 73 6222 are used in this tutorial, however, despite the code used, method implemented in the BIM link is If you are importing for the first time, set up the generation of design groups and design members. The program automatically joins the imported bridge superstructure into one design member.
Concrete
RCS
BIM link
midas Civil + Gen
Bridges
Tutorial
ETABS BIM link for steel member buckling analysis (AISC)
The member is now ready to be opened in IDEA StatiCa Member for the CBFEM analysis. 3 Design Automatic data transfer is started, and IDEA StatiCa Member To get the analysis of the member, we first have to design all the joints along with the member.
Steel
BIM link
ETABS
AISC (USA)
Member
Tutorial
Grasshopper API link - how to create an IDEA StatiCa IOM file for imports (01)
IDEA StatiCa Connection - Design of a joint and IOM export For the example, you will create a simple moment connection using a template: To be able to
Steel
Connection
IDEA Open Model (API)
Grasshopper
Tutorial
Grasshopper API link - Cost estimation (05)
IDEA StatiCa Connection – Design of a joint and set parameters For the example, you will create a simple moment connection using a template: Change both
Steel
Connection
IDEA Open Model (API)
Grasshopper
Parametric design