Webinar
Summer Series – Best practice for designing of prestressed beams
-
2020-08-19T00:00:00.0000000Z(in uw lokale tijd, 24-uurs formaat)
Webinar datum:
Volg het webinar en leer meer over
IDEA StatiCa Beam
- Ideal geometry of the beam
- Boundary conditions
- Loads (point/uniform load)
- Export to IDEA StatiCa Detail
IDEA StatiCa Detail
- How to handle construction stages and rheology load cases after export
- Optimization of point forces and supports
- Prestressing in CS
- Interpretation of the results
Sprekers
![Lukas Juricek](https://assets-us-01.kc-usercontent.com:443/1ca05609-4ad1-009e-bc40-2e1230b16a75/6f42099b-90c4-4650-bcad-d244b15745d7/Lukas%20Juricek.png?w=95&h=95&fit=crop)
Lukas Juricek
Product Engineer
IDEA StatiCa
IDEA StatiCa
Are you a structural engineer focusing on the prestressed girders and want to know how to design these members safely in IDEA StatiCa? Do you want to find out how the BIM link between IDEA StatiCa Beam and Detail app works? If your answer is yes, our forthcoming webinar is the right one for you.
We will show you how to design, support, and load a model in the IDEA StatiCa Beam application for the following export to the Detail application. We will introduce some processing in the Detail app for the correct behavior of the model after export. Then we will follow with an explanation of the import of combinations created in the previous step in the Beam app.
Example 1 – pre-tensioned saddle beam
Pre-tensioned saddle beam subjected to uniform load and concentrated loads, all exported from IDEA StatiCa Beam to IDEA StatiCa Detail.
Example 2 – compression stress distribution in concrete
Stress results based on non-linear analysis (CSFM) of a pre-tensioned saddle beam.